|
Our range of glazing bars have been designed to provide a range of spanning distances for a multitude of applications from domestic lean-to conservatories to large commercial glazing areas. Bars are designed to make installation as quick and easy as possible and are complemented by a simple and effective variable pitch wall plate and eaves beam system.
All self supporting bars, wall plates and eaves beams are supplied in a range of lengths and come complete with all structural aluminium profiles, PVC top cappings and undercladding, gaskets, end caps and fixing screws. All products are conveniently packed in individual poly-tubes for today’s fast moving trade sales outlets.
The Self Supporting Glazing Bar Range is available as a Main Bar and Universal Edge Bar, in 2.5, 3.0, 3.5, 4.0 and 6.0 metre lengths in White PVCu or Mahogany Woodgrain. Each product is packed complete with structural aluminium bar, relevant glazing plastics, gaskets, end cap, fixing screws and colour coded caps together in individual poly-tubes. Wall plates and eaves beams are available in white and mahogany/brown in 3.0, 4.0 and 6.0 metre lengths.
|
|
|
|
|
‘Universal Edge’ Bar is used at the verge ends of lean-to roofs to finish the edges. This bar is used with both the 70’ and 85’ bars and suitable for 16mm to 25mm thick glazing. The one piece top capping incorporates a side trim to cloak
vertical glazing detail.
Variable Pitch
Eavesbeam provides
a strong and simple solution to fix bars at the eaves on top of the windows or up-stands. A flipper gasket seals between the glazing bars. The eaves beam can be fixed from either above or below and is variable pitch from 2.5º to 30º
Variable Pitch ‘Wallplate’ is very simple to install between 2.5º to 30º pitch. When screw fixed to the wall, bars bolt onto the wall plate and glazing is pushed up into the glazing aperture and sealed effectively. The wallplate can be conveniently flashed prior to fitting the roof.
70’ Standard Bar is the smallest and most economical self supporting bar typically used for smaller domestic lean-to applications or over purlins on larger roofs. It has a maximum span of 3.15 metres at 600mm centres and is suitable for 16mm to 25mm polycarbonate sheet.
85’ Heavy Duty Bar is for larger lean-to roofs or commercial glazing applications where longer spans or heavier loading specifications are required. It has a maximum self supporting span of up to 4.15 metres at 600mm centres and is suitable for 16mm to 25mm polycarbonate sheet or glass units (contact our sales office for spanning details on glass units).
|
|
|
|
